A metro train spends its life in a tunnel, cycling between a station and a dark, damp bore every few minutes. Rolling stock cable has to pass the strictest fire and smoke rules in public transport, survive constant vibration between bogie and body, and stay serviceable for a thirty-year asset life. Chengrun supplies the sleeving, tubing and tape that rolling-stock and infrastructure builders specify, with the fire documentation that a rail authority demands.
Rail buyers rarely negotiate on three points. Fire and smoke: cables in a tunnel or a train interior must not propagate flame or release toxic smoke, so halogen-free, low-smoke materials are standard. Vibration and shock: couplers, bogies and door mechanisms generate high-cycle fatigue that cracks rigid insulation. And maintenance: a fleet engineer has to be able to inspect and repair a cable in a depot window of a few hours.
Inside a car, smoke density and toxicity decide approval. Halogen-free, flame-retardant braided sleeving keeps a bundle protected without adding halogens that would produce acid smoke in a fire. PET flame-retardant braided sleeve gives a self-extinguishing, halogen-free jacket for interior runs, and PET textile sleeving provides a lightweight, flexible cover for door and lighting harnesses.
Below the floor, cable meets grit, water and vibration. Corrugated tube in PA or PP protects under-floor runs against impact and abrasion while allowing the flexion a bogie demands, and nylon conduit tubing handles the tight radii around bogie frames. Near traction equipment and brake resistors, silicone coated fiberglass sleeving holds at 200°C where PVC would harden and crack.
Traction power runs at high voltage, and a chafed cable is a serious event. Aluminium busbar wrap covers busbar connections, and heat shrink textile sleeving closes over joints with a low profile inside crowded cabinets. Orange PET textile self-closing wrap marks and protects high-voltage runs, and adhesive lined dual wall heat shrinkable tubing seals terminations against the water and dust that a tunnel environment guarantees.
Wayside equipment sees weather for decades. PP flame-retardant corrugated tube and PA conduit protect signalling and power cable against UV, water and rodents, while PET tinned copper braided sleeving screens the data and signalling lines that must stay interference-free next to traction current. EMI shielding braided sleeving is the choice for communication and control circuits in a dense electrical environment.
A depot window is short, so repair materials must be quick and reliable. Heat shrink textile sleeving restores a textile-covered joint in one operation, and self-closing wraps such as braided self-closing wrap install over in-service cable without disconnecting it. Acetate cloth tape and PVC tape finish harnesses to the fleet's standard practice.
Location |
Material |
Interior, smoke-critical |
PET flame-retardant braided sleeve |
Under-floor / bogie |
PA or PP corrugated tube |
Near traction / brake resistors |
Silicone coated fibreglass sleeving |
HV busbar and joints |
Aluminium busbar wrap, heat shrink textile sleeving |
HV marking |
Orange flame-retardant self-closing wrap |
Signalling / comms lines |
PET tinned copper braided sleeving |
Depot repair |
Heat shrink textile sleeving, self-closing wrap |
Rail approvals hinge on fire performance and traceability. Chengrun provides per-model documentation — UL and CSA listings, RoHS 2.0 and REACH SVHC declarations, Prop 65 statements where relevant — together with material datasheets that state temperature class, flammability rating and halogen content, so a rail authority or a fleet engineer can build a submission. The Dongguan factory operates under an ISO 9001 and IATF 16949 quality management system.
In rail, a material is approved or rejected on fire behaviour before anything else is discussed. Interior and tunnel cabling must not propagate flame or release dense, toxic smoke, which is why halogen-free, low-smoke constructions dominate the interior specification. State the required test and the acceptance criterion up front; the material choice follows from those two lines, not the other way round. Chengrun provides temperature class, flammability rating and halogen content for each model so a submission can be assembled without a round of clarifying questions.
A fleet engineer has a few hours, not a few days. Repair materials therefore have to work over an in-service cable, without disconnecting it wherever possible. Self-closing wraps and heat-shrink joints are the practical answer, and keeping a small stock of the two or three sizes used most on that fleet turns a long repair into a short one. Because one factory produces the sleeving, conduit, heat shrink and tape, a fleet can standardise on a single supplier and a single quality standard instead of chasing five purchase orders.
Rolling-stock insulation runs across fibre sleeving, corrugated tubing, heat shrink, braided sleeving and tape, and sourcing them separately multiplies the qualification work. Chengrun manufactures all five in house, with custom cut lengths, printed identification and die-cut parts available, so a car builder or a fleet operator can standardise on one supplier and one quality standard. Send your drawing, the fire test required and the operating temperature, and an engineer will reply within 24 hours.