Welcome to our store!

tinned-copper-self-closing-wrap-cr-bs-5004, tinned-copper-self-closing-wrap-cr-bs-5004, /tinned-copper-self-closing-wrap
tinned-copper-self-closing-wrap-cr-bs-5004, tinned-copper-self-closing-wrap-cr-bs-5004, /tinned-copper-self-closing-wrap
Inquiry
tinned-copper-self-closing-wrap-cr-bs-5004, tinned-copper-self-closing-wrap-cr-bs-5004, /tinned-copper-self-closing-wrap
tinned-copper-self-closing-wrap-cr-bs-5004, tinned-copper-self-closing-wrap-cr-bs-5004, 
Inquiry

Tinned Copper Self-closing Wrap-CR-BS-5004

CR-BS-5004 is made of a mixture of tin-plated copper wire, polyester monofilament and tin-plated copper foil wire, which has the function of excellent shielding electromagnetic interference. The side opening structure is easy to install and maintain.

 

 

Tinned Copper Self-closing Wrap-CR-BS-5004Download Product Manual:

Tinned Copper Self-closing Wrap-CR-BS-5004Tinned Copper Self-closing Wrap-CR-BS-5004Tinned Copper Self-closing Wrap-CR-BS-5004

Request a Quote
  • Overview

Overview

Tinned Copper Self-closing Wrap-CR-BS-5004 for Harness EMI Shielding

Tinned Copper Self-closing Wrap-CR-BS-5004 is a side-open shielding wrap for cable and wire-harness assemblies that need electromagnetic-interference control together with practical service access. Its construction combines tin-plated copper wire, polyester monofilament, and tin-plated copper foil wire. The conductive copper elements support shielding performance, while the braided construction provides a flexible wrap format for routing around existing harness bundles. Rather than requiring a connector or terminal to be passed through a closed sleeve, Tinned Copper Self-closing Wrap-CR-BS-5004 can be opened, positioned around the bundle, and allowed to close around the cable run.

This installation approach matters when a harness is already terminated, when a repair is being made, or when access may be needed later. Tinned Copper Self-closing Wrap-CR-BS-5004 is therefore intended as a harness-protection component, not as a substitute for confirming the complete electrical and mechanical requirements of the final assembly. For any project, the cable diameter, bend path, fixation method, temperature exposure, EMC target, and required documentation should be checked together before a final size is selected.

Verified Shielding and Temperature Information

The supplied product information for Tinned Copper Self-closing Wrap-CR-BS-5004 states shielding effectiveness greater than 60 dB across 30 MHz to 3 GHz, tested in accordance with GB/T 30142. This stated result provides a factual starting point for engineers assessing electromagnetic shielding around signal or control harnesses. Actual system performance can also depend on coverage, overlap, grounding design, cable construction, routing near interference sources, and the configuration of the finished assembly.

Item Supplied product information
Construction Tin-plated copper wire, polyester monofilament, and tin-plated copper foil wire
Shielding effectiveness 60 dB, 30 MHz to 3 GHz
Test method stated GB/T 30142
Working temperature -50°C to 150°C
Structure Side-open, self-closing wrap
Flame-retardant construction Stated in supplied product information

this self-closing shielding wrap has a stated working temperature range of -50°C to 150°C. That range may be relevant where harnesses experience low-temperature handling or elevated temperatures in equipment and vehicle environments. A temperature figure alone is not a complete application approval: users should assess local hot spots, installation clearances, vibration, exposure duration, and any customer-specific validation requirements.

Functional Features

Self-closing access for installed harnesses

The side opening of this self-closing shielding wrap supports installation without threading a complete harness through a closed tube. This can simplify fitting on pre-assembled cable groups and can make inspection or maintenance more convenient. It is especially useful where connectors make a conventional closed sleeve impractical. Installation quality still matters: the wrap should be selected and positioned so that it maintains appropriate coverage through bends and fixed points.

Hybrid braided material system

The combination of tin-plated copper wire, polyester monofilament, and tin-plated copper foil wire is the defining material feature of this self-closing shielding wrap. It is designed to provide an electromagnetic shielding path in a flexible braid. The supplied data should be treated as the product-fact basis; no additional electrical, abrasion, chemical-resistance, or mechanical-life values are asserted here without project-specific evidence.

Flame-retardant construction

The available product information identifies flame-retardant construction. Where a program has a specified flame test, target-market requirement, or OEM requirement, buyers should request the applicable supporting documentation and verify that the selected configuration is suitable. A flame-retardant material statement does not by itself establish compliance with every system or regional requirement.

Serviceable harness coverage

this self-closing shielding wrap can be reopened for access to the harness, helping technicians review routing or perform service without automatically replacing a closed protective sleeve. In a production or service process, this practical access should be balanced against the needed overlap, securing approach, and completed-harness shielding design.

Size Selection and Installation Considerations

this self-closing shielding wrap is listed in standard nominal inner diameters of 8, 10, 13, 16, 19, 25, 30, 38, and 50 mm. The supplied information lists applicable bundle ranges from 5 to 60 mm, depending on size, with at least 30% overlap. Standard reel lengths are stated as 100 m for 8–16 mm, 50 m for 19–25 mm, and 25 m for 30–50 mm. The standard product table identifies corresponding part numbers and article numbers for these options.

For selection, first measure the actual bundle diameter and allow for branch-outs, bend areas, clips, and the desired overlap. It is tempting to choose the largest wrap for easy fitting, but that is not always the best decision. A loose selection can reduce consistent coverage; a size with insufficient allowance can make fitting difficult. this self-closing shielding wrap should be assessed on the real harness geometry, not on a nominal cable size alone.

  • Confirm the bundle diameter at straight sections and at the largest local feature.
  • Check that the selected size retains the required overlap after routing.
  • Review the effect of brackets, clips, bends, and service-access points.
  • Confirm whether project documentation requires a specific validation method.
  • Use the supplied standard-size information as the selection baseline and discuss custom dimensions when needed.

Application Contexts

Automotive and new-energy vehicle harnesses

this self-closing shielding wrap is presented for automotive harness shielding, including applications around electrically noisy equipment. In such applications, shielding decisions should consider the complete harness layout, connector interfaces, grounding method, and OEM or Tier-1 validation requirements. The product page also states quality-system certifications for the manufacturing site; purchasers should obtain the documents relevant to their own supplier-qualification process.

Rail and transportation equipment

Rail, metro, and other transportation harnesses can require attention to interference management and maintainable routing. The self-closing construction of this self-closing shielding wrap can support installation or service where terminating a harness is not desirable. The final application assessment should still be based on the customer’s system specifications and applicable standards.

Industrial electrical assemblies

For industrial control, communication, and equipment harnesses, this self-closing shielding wrap offers a fact-based option where a flexible EMI shielding wrap and serviceable side opening are relevant. It should not be assumed to provide unrelated functions such as waterproof sealing or electrical insulation unless those functions are separately specified and validated.

Tinned Copper Self-closing Wrap-CR-BS-5004

CR-BS-5004 is made of a mixture of tin-plated copper wire, polyester monofilament and tin-plated copper foil wire, which has the function of excellent shielding electromagnetic interference. The side opening structure is easy to install and maintain.

 

 

Tinned Copper Self-closing Wrap-CR-BS-5004Download Product Manual:

Tinned Copper Self-closing Wrap-CR-BS-5004Tinned Copper Self-closing Wrap-CR-BS-5004Tinned Copper Self-closing Wrap-CR-BS-5004

Request a Quote

Featured Products

tinned copper self closing wrap cr bs 5004-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Mobile
Name
Company Name
Position
Message
0/1000