CR-BS-4001 is a self-closing wrap and woven from PET monofilaments and multifilaments. The orange appearance facilitates high-voltage identification and it’s robust structure provides superior impact protection for cables.
Download Product Manual:
Thicken Plain Weave Self-closing Wrap-CR-BS-4001 is an orange PET sleeve for protecting automotive wire harnesses in chassis routing. Its thickened plain-weave construction combines PET monofilaments and multifilaments with a self-closing format. The product is intended to add a protective layer around cables where impact, abrasion, temperature change, and exposure to typical vehicle fluids are relevant considerations.
Rather than treating a sleeve as a stand-alone system solution, engineers can review Thicken Plain Weave Self-closing Wrap-CR-BS-4001 as one part of an installed harness design. Cable diameter, branch geometry, clip locations, bend zones, vehicle routing, and the programme validation plan all affect the final selection. The self-closing construction is useful when a wrap-around installation method is preferred for an assembled harness.
The woven PET structure of Thicken Plain Weave Self-closing Wrap-CR-BS-4001 is specified as firm and dense. In chassis service, a dense weave can help spread contact across the sleeve surface instead of concentrating it directly on a conductor bundle. The orange appearance also supports visual identification of high-voltage harness routing on relevant vehicle platforms.
The existing product information lists ISO 6722-1 Class 6 abrasion resistance at more than 30,000 cycles. It also lists FMVSS 302 self-extinguishing behaviour, a working temperature range of -40°C to 150°C, thermal aging at 175°C for 336 hours with no cracking or fracture, and low-temperature bending at -40°C for four hours with no cracking or fracture. These are product-page test statements; a buyer should request product-specific reports when a qualification file requires them.
Fluid and chemical resistance is listed under D47 1924 with no fading or decomposition. A hot-bending entry lists a 180-degree bend, 1 kg load, 175°C, and three hours, with no damage or distortion. These details provide a useful starting point for technical review, but they do not replace vehicle-specific confirmation of the finished harness assembly.
For an assembly team, the primary practical benefit of Thicken Plain Weave Self-closing Wrap-CR-BS-4001 is access. A technician can route the sleeve around a completed bundle and adjust its position during build or maintenance. That convenience should be considered alongside coverage length, branches, clips, and the chance of sleeve movement in the installed condition.
| Part No. | Nominal I.D. | Thickness | Reel Length |
|---|---|---|---|
| CR-BS-40010714 | 7 mm | 1.0 ± 0.2 mm | 100 m |
| CR-BS-40011014 | 10 mm | 1.0 ± 0.2 mm | 100 m |
| CR-BS-40011314 | 13 mm | 1.0 ± 0.2 mm | 100 m |
| CR-BS-40011614 | 16 mm | 1.0 ± 0.2 mm | 100 m |
| CR-BS-40011914 | 19 mm | 1.0 ± 0.2 mm | 50 m |
| CR-BS-40012514 | 25 mm | 1.0 ± 0.2 mm | 25 m |
the self-closing wrap is available in nominal internal diameters from 7 mm to 25 mm. Standard reel lengths vary by size. Fixed cut lengths, non-standard internal diameters, and additional reel lengths are available on request. Measure the actual harness bundle and allow for branches or routing transitions before choosing a diameter.
the self-closing wrap can be reviewed for underbody and chassis harnesses where road debris and repeated mechanical contact are expected. The technical review should check the sleeve’s coverage at clips, bends, and transitions, not only the straight sections of the bundle. A confirmed routing drawing helps the buyer select sensible cut lengths and installation points.
For an EV or hybrid platform, the self-closing wrap combines a visible orange layer with mechanical protection features described on the product page. The final design still needs to meet the vehicle maker’s requirements for electrical separation, thermal exposure, flammability, clearances, and service practices. Use the product documentation as supporting information, not as a substitute for platform validation.
the self-closing wrap may also be assessed for commercial vehicles and off-road equipment where debris, temperature cycling, and maintenance access can be important. Inspect the installed route for vibration points, sharp edges, fluid splash areas, and locations where a split construction simplifies later service.
During sample fitting, check that the wrap closes evenly around the bundle and that its edges do not interfere with clips, connectors, branch-outs, or intended inspection access. Record the sleeve position on the harness drawing so the installation method can be repeated consistently across builds. Where a route changes direction, confirm that the chosen diameter remains suitable through the bend and does not create an unintended opening. This practical check supports a clear handover between design, purchasing, assembly, and service teams.
Start each enquiry with the harness diameter, routing zone, required quantity, reel preference, and planned cut length. Then compare those needs with the listed sizes and the vehicle programme’s test requirements. This approach keeps the purchasing discussion focused on supported details rather than assumptions.
the self-closing wrap is best evaluated through a practical, evidence-led process: confirm the intended sleeve size, review the documented test information, fit a sample on the representative bundle, and obtain required reports before releasing a production specification. For projects requiring a high temp wire wrap, clarify whether the stated operating range and the complete assembly validation meet the application requirement. A heat shrinkable tubing with adhesive inner liner is a different product category and should be assessed separately rather than assumed to provide the same function.
The manufacturer states that its facility holds ISO 9001, IATF 16949, ISO 14001, ISO 45001, and GJB9001C certifications. Buyers can request relevant product-specific test documentation during supplier qualification. By matching available evidence to the actual routing environment, the self-closing wrap can be considered with appropriate technical caution.
CR-BS-4001 is a self-closing wrap and woven from PET monofilaments and multifilaments. The orange appearance facilitates high-voltage identification and it’s robust structure provides superior impact protection for cables.
Download Product Manual: