CR-BS-3003 is braided from Polyphenylene Sulfide (PPS) monofilament. Featuring exceptional temperature resilience, ultra-low moisture absorption, and superb dimensional stability, it maintains reliable mechanical and chemical resistance in extreme heat, RoHS certified.
Download Product Manual:
PPS Braided Sleeving-CR-BS-3003 is a braided protective sleeve made from Polyphenylene Sulfide monofilament. It is intended for hoses, harnesses, and cable assemblies that face heat, abrasion, chemical exposure, humidity, or vibration. The supplied product information states a working temperature range from –70°C to +200°C, heat aging at 200°C for 240 continuous hours, and flexibility at –70°C. These documented points give engineers a starting basis for assessing protection in severe thermal conditions.
PPS is described in the product material as a semi-crystalline engineering thermoplastic with thermal stability, chemical inertness, and ultra-low moisture absorption. The braided format distributes contact over the sleeve surface and is intended to protect a bundle from friction, cuts, and external wear. Selection should be based on the full installation: temperature peaks and duration, fluid type, movement, bend geometry, fixing method, and customer requirements all influence the final result.
For an engine-bay harness, industrial machine, oven, or robotic system, sustained temperature may matter more than a brief peak. PPS Braided Sleeving-CR-BS-3003 can be considered where elevated heat is a primary design condition. The recorded 200°C/240-hour heat-aging statement is useful evidence to review during a technical evaluation. It is not a replacement for project-specific validation where the sleeve contacts hot components, experiences sharp thermal cycling, or operates near aggressive fluids.
Cold installation and service can be overlooked when a project concentrates on peak heat. The supplied information confirms flexibility at –70°C. That result is relevant for outdoor equipment, vehicles, or cold-region installation. The completed harness should still be tested in its actual configuration, because cable stiffness, tape wraps, connectors, branch-outs, and fixing points affect how a sleeved bundle bends during assembly and service.
The supplied description presents PPS as resistant to oils, hydraulic fluids, and broad industrial chemicals, including elevated-temperature exposure. Its low moisture uptake is intended to help limit humidity-driven dimensional change. This braided sleeve is therefore a candidate for routes where vibration, abrasion, moisture, and chemical contact occur together. Confirm compatibility with the actual medium, concentration, temperature, and exposure duration rather than relying only on a general material description.
A larger sleeve does not automatically give better protection. Correct fit and material suitability are more important than oversizing. Excess clearance can reduce tidy coverage and complicate routing, while insufficient clearance can make installation difficult. Measure the completed bundle, including tape wraps and likely branch-outs, then compare that dimension with the published applicable range. Where connectors must pass through the sleeve, confirm the assembly sequence before release.
The product is available in twelve standard reference widths from 3 mm to 38 mm. Depending on size, the stated applicable bundle range spans 1 mm to 45 mm. Reel lengths range from 100 m to 1000 m. Fixed-length cutting is available, and other sizes may be customized on request. This allows a common PPS material concept across several harness diameters while retaining braided mechanical protection.
| Reference width | Applicable range | Reel length |
|---|---|---|
| 3 ± 1 mm | 1–5 mm | 1000 m |
| 6 ± 2 mm | 3–9 mm | 500 m |
| 8–19 mm | 5–25 mm | 300 m |
| 25–32 mm | 18–40 mm | 200 m |
| 38 ± 4 mm | 30–45 mm | 100 m |
Use the complete published size table when selecting an exact part number. The table here is a guide, not a substitute for individual reference-width tolerances. For nonstandard cuts or diameters, provide the target dimensions, bundle construction, operating temperatures, and expected exposure conditions for feasibility review.
PPS Braided Sleeving-CR-BS-3003 can be evaluated for vehicle harness routes where radiated heat, vibration, fluids, and abrasion are combined. The stated FMVSS 302 result, thermal range, and heat-aging information are relevant qualification inputs. Automotive programs can also require OEM-specific testing, controlled documents, and defined sample conditions; confirm those requirements before selection.
For industrial machinery, ovens, robotic systems, and high-temperature manufacturing equipment, the sleeve offers a braided option for protecting wires and hoses at contact-prone routing points. Review sharp edges, clamp positions, repeated motion, and potential chemical splash. A sleeve can reduce surface wear, but overall reliability also depends on routing, support spacing, and installation quality.
In chemical-processing equipment, marine engine rooms, agricultural machinery, and similar settings, low moisture uptake and chemical-resistance attributes may be useful selection factors. This is a mechanical protective sleeve, not a stated sealed connector system. If a route requires environmental sealing, evaluate compatible termination and sealing components separately and validate the complete assembly.
The supplied manufacturing-site information lists ISO 9001, IATF 16949, ISO 14001, ISO 45001, and GJB9001C certifications. The product data also references RoHS and FMVSS 302. Match every certification or test statement to the buyer’s actual application, document version, sample condition, and acceptance criteria. One result does not automatically establish compliance with every market, vehicle program, or end-use rule.
A practical review begins with maximum and minimum service temperature, expected fluid exposure, completed harness diameter, and required flammability or customer criteria. Then confirm fit on the real assembly and request relevant heat-aging, low-temperature-flexibility, or flammability documentation where needed. This approach supports an evidence-led decision rather than a choice based only on nominal diameter or appearance.
This PPS braided sleeve is not high heat harness tape or glass cloth tape. Those terms describe different protection approaches and should be compared only against the finished assembly’s needs. Where heat, abrasion, chemicals, and temperature cycling occur together, assess the complete protection system and confirm material compatibility before production approval.
CR-BS-3003 is braided from Polyphenylene Sulfide (PPS) monofilament. Featuring exceptional temperature resilience, ultra-low moisture absorption, and superb dimensional stability, it maintains reliable mechanical and chemical resistance in extreme heat, RoHS certified.
Download Product Manual: