CR-BS-1005 is a durable, high quality polyester compound braid that provides abrasion protection while effectively reducing noise and resisting corrosion to protect hoses, cables and wires in extreme applications.
Download Product Manual:
PET Textile Sleeving-CR-BS-1005 is a polyester multifilament braided sleeving designed to protect hoses, cables, and wire harnesses where rubbing, vibration, oil exposure, and temperature changes must be considered together. PET Textile Sleeving-CR-BS-1005 creates a textile braid around the routed component rather than simply bundling it. This makes PET Textile Sleeving-CR-BS-1005 a practical option when the protective layer needs to resist contact wear while remaining suitable for complex routing.
For engineering teams, the important starting point is the actual routing condition. PET Textile Sleeving-CR-BS-1005 is documented for a continuous working temperature range of −50°C to +150°C. The existing product data also records a heat-aging pass at 175°C for 240 hours and a low-temperature cold-test pass after storage at −70°C for 24 hours. Those results help define the documented material envelope; project-specific validation should still be confirmed when the application has unusual media, loading, or installation constraints.
For a practical review, compare the bundle outside diameter with the selected nominal inside diameter and allow for routing changes at clips, brackets, and service points. Check whether installation requires the sleeve before or after connector assembly. Confirm that the braid can be fitted without damaging adjacent insulation, and document any site-specific acceptance criteria. Where a design faces repeated motion, evaluate the full assembly rather than the sleeve in isolation. These checks support a measured selection decision.
The braided polyester construction of the braided sleeving provides a protective interface for cable bundles, hoses, and wires. the braided sleeving is listed with ISO 6722:2013 Class 6 scrape abrasion resistance above 60,000 cycles. The product information also describes resistance to oil corrosion, impact loads, and friction-induced vibration noise. These are product-level statements drawn from the supplied CMS material, not a substitute for application approval.
| Item | Documented condition | Result |
|---|---|---|
| Scrape abrasion resistance | ISO 6722:2013 | Class 6, 60,000 cycles |
| Heat aging | 175°C, 240 hours | Pass |
| Cold test | −70°C storage, 24 hours | Pass |
| Continuous working temperature | Operating range | −50°C to +150°C |
Many buyers assume a larger sleeve diameter automatically means better protection. In practice, the braided sleeving should be selected around bundle diameter, routing space, contact points, and the required abrasion envelope. Braid consistency, material behavior, and fit at high-stress bends are more meaningful than diameter alone.
the braided sleeving can be considered for wire-harness routing where movement, debris, vibration, and oil spray create abrasion concerns. the braided sleeving is supported by the listed Class 6 abrasion result and the documented temperature range. The CMS source states that the manufacturing facility holds ISO 9001, IATF 16949, ISO 14001, ISO 45001, and GJB9001C certifications; buyers should request the documentation relevant to their supplier-qualification process.
For cable tracks, robotic equipment, control assemblies, and hydraulic-hose bundles, the braided sleeving offers a braided external layer where components may contact adjacent surfaces. In these installations, inspect the smallest bend radius and all fixed contact points. Wear is often concentrated where a route repeatedly flexes or where a bundle touches a bracket, so the sleeve size and routing design need to be considered together.
the braided sleeving may be used as an external protective sleeving where abrasion and oil-related exposure coexist. It is not presented as a replacement for the hose or cable’s own required pressure, electrical, or fluid-containment rating. Where the project requires fire performance, a fire proof cable sleeve may be a separate requirement and must not be inferred from this product’s documented properties.
the braided sleeving is listed in 15 standard nominal ID sizes: 10, 13, 16, 19, 23, 25, 29, 32, 38, 42, 45, 48, 55, 61, and 72 mm. The stated nominal wall thickness is 0.8 ± 0.15 mm across the range. Standard reel length is 50 m. Fixed-length cutting and non-standard sizes are available upon request according to the supplied content.
| Nominal ID | Layflat width | Thickness | Reel length |
|---|---|---|---|
| 10–32 mm | 20–55 mm | 0.8 ± 0.15 mm | 50 m |
| 38–72 mm | 65–118 mm | 0.8 ± 0.15 mm | 50 m |
When comparing the braided sleeving with alternatives such as 4 inch heat shrink tubing or adhesive lined heat shrink, note that those products have different installation and protection functions. Green pet tape is likewise a distinct bundling material. the braided sleeving is the braided abrasion-protection choice described on this page, while the correct final construction depends on the complete assembly requirement.
Before ordering the braided sleeving, provide the bundle diameter, installation route, temperature condition, expected contact surfaces, and desired cut length. The listed values are typical product data. Request project-specific test documentation when your design needs formal verification.
CR-BS-1005 is a durable, high quality polyester compound braid that provides abrasion protection while effectively reducing noise and resisting corrosion to protect hoses, cables and wires in extreme applications.
Download Product Manual: