Welcome to our store!

pet-monofilament-braided-sleeving-cr-bs-1002, pet-monofilament-braided-sleeving-cr-bs-1002, /pet-monofilament-braided-sleeving
pet-monofilament-braided-sleeving-cr-bs-1002, pet-monofilament-braided-sleeving-cr-bs-1002, /pet-monofilament-braided-sleeving
Inquiry
pet-monofilament-braided-sleeving-cr-bs-1002, pet-monofilament-braided-sleeving-cr-bs-1002, /pet-monofilament-braided-sleeving
pet-monofilament-braided-sleeving-cr-bs-1002, pet-monofilament-braided-sleeving-cr-bs-1002, 
Inquiry

PET Monofilament Braided Sleeving-CR-BS-1002

CR-BS-1002 is braided from high quality PET monofilament. Expandable for easy snapping into connectors and long distance harnesses. Excellent abrasion and chemical resistance. Available in a variety of colors with flat hot cut ports.

 

 

PET Monofilament Braided Sleeving-CR-BS-1002Download Product Manual:

PET Monofilament Braided Sleeving-CR-BS-1002PET Monofilament Braided Sleeving-CR-BS-1002PET Monofilament Braided Sleeving-CR-BS-1002

Request a Quote
  • Overview

Overview

PET Monofilament Braided Sleeving-CR-BS-1002

PET Monofilament Braided Sleeving-CR-BS-1002 is an expandable protective sleeve made from PET monofilament for cable and wire-harness routing. Its braided construction opens when compressed along its length, helping installers pass the sleeve over connectors and then position it around a bundle. This makes PET Monofilament Braided Sleeving-CR-BS-1002 a practical option where a harness needs a neat outer layer without dismantling every connector.

For engineering teams, the selection question is not simply whether a sleeve fits at the start of assembly. The real consideration is whether the material, coverage range, abrasion performance, and temperature range fit the route throughout service. PET Monofilament Braided Sleeving-CR-BS-1002 is supplied for applications that need an expandable PET braid with a stated working temperature range of -50°C to +150°C, V0 vertical burning and HB horizontal burning ratings under GB/T 2408-2021, and Grade 4 abrasion resistance under ISO 6722-1:2006.

Core Specifications

Parameter Source-stated value
Material PET monofilament
Working temperature -50°C to +150°C
Vertical burning rating V0, GB/T 2408-2021
Horizontal burning rating HB, GB/T 2408-2021
Abrasion resistance Grade 4, ISO 6722-1:2006
Reference width range 3 mm to 64 mm
Applicable bundle diameter 1 mm to 80 mm

PET Monofilament Braided Sleeving-CR-BS-1002 is available across fourteen standard part numbers. The source material identifies part numbers ranging from CR-BS-1002250301 to CR-BS-1002256401. Selection should be based on the actual outer diameter of the completed bundle, including tape, branch-outs, and connector transitions rather than conductor diameter alone.

Why the Braided Construction Matters

Expandable routing around connectors

The open braid of PET Monofilament Braided Sleeving-CR-BS-1002 expands radially when compressed axially. A useful comparison is a woven finger sleeve: pushing the braid together increases its opening, while pulling it along the bundle returns it to a closer fit. That behavior can simplify routing over connector bodies and along long harness sections. It does not replace correct sizing; installers should still choose a size whose stated bundle range brackets the finished harness.

Surface protection for moving or contacting routes

This sleeving has a source-stated Grade 4 abrasion resistance classification under ISO 6722-1:2006. For cable routes near brackets, guards, moving equipment, or vibration-prone hardware, abrasion resistance is only one part of the design review. Confirm clamp locations, edge protection, motion, bend radius, and exposure conditions for the complete assembly. The sleeve can provide an outer wear layer, but no braid should be treated as a substitute for eliminating sharp contact points.

Temperature and burning-rating considerations

The product has a stated -50°C to +150°C working range. That range may be relevant to automotive and industrial routing where cold installation conditions and elevated service temperatures both matter. The V0 vertical and HB horizontal burning results are stated under GB/T 2408-2021. Buyers requiring formal project approval should request the applicable product documentation and verify that the test basis, assembly configuration, and market requirements match their own specification.

Clean cut ends and color identification

The product summary describes flat hot-cut ends and a choice of colors. Flat hot-cut ends can help reduce loose braid at the cut edge during harness preparation. Colors can support visual zone identification where a customer’s assembly instructions use color coding. These features should be coordinated with the production method and the customer’s own identification rules.

Application Fit

Automotive and vehicle harnesses

This braided sleeving can be considered for harness sections where expansion around connectors, protection from repeated contact, and a stated wide temperature range are relevant. Typical review points include routing near vibration sources, heat exposure, connector geometry, and the required flame-performance documentation. The product page’s existing source material positions the series for demanding automotive environments; final validation remains application specific.

Industrial machinery wiring

On machinery, cables often pass through constrained paths, near moving members, or beside fluid lines. The product offers a braided PET outer layer for such cable-management designs. Before release, check whether the intended fluids, cleaning process, and mechanical contact pattern are compatible with the complete harness design. Where the route changes diameter, select each sleeve section according to the local finished bundle size.

Electrical equipment and control enclosures

For control cabinets and electrical equipment, This sleeving can organize and protect grouped wiring while retaining visual access to the bundle. The expandable construction is useful where completed cable ends must pass through the sleeve. Confirm the enclosure’s safety requirements separately, because system-level compliance depends on the full construction rather than one component alone.

Selection and Installation Guidance

Start by measuring the largest outside diameter that the sleeve must pass over, including connector shells where applicable. Then compare the finished bundle diameter with the stated 1 mm to 80 mm applicable range across the available sizes. A larger sleeve may pass a connector more easily, while an excessively oversized braid may provide less consistent coverage along a small bundle. The selected sleeving should be chosen with both installation and in-service coverage in mind.

A common sizing mistake is to assume that a larger nominal sleeve automatically gives better protection. In practice, protection depends on material, braid coverage, abrasion exposure, and correct fit—not diameter alone. For cold-environment installations, confirm the proposed assembly process under expected site conditions rather than relying only on nominal temperature information. From an engineering perspective, the right choice is the size and construction that matches the routing boundary conditions.

During installation, use a controlled cutting method appropriate to the assembly process and inspect the cut end before final assembly. Route the sleeve so that it covers the intended contact zone, then verify that clamps, ties, and adjacent edges do not create a new abrasion point. The product is designed as a protective sleeving component; performance in the finished system depends on the final routing and validation plan.

PET Monofilament Braided Sleeving-CR-BS-1002

CR-BS-1002 is braided from high quality PET monofilament. Expandable for easy snapping into connectors and long distance harnesses. Excellent abrasion and chemical resistance. Available in a variety of colors with flat hot cut ports.

 

 

PET Monofilament Braided Sleeving-CR-BS-1002Download Product Manual:

PET Monofilament Braided Sleeving-CR-BS-1002PET Monofilament Braided Sleeving-CR-BS-1002PET Monofilament Braided Sleeving-CR-BS-1002

Request a Quote

Featured Products

pet monofilament braided sleeving cr bs 1002-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Mobile
Name
Company Name
Position
Message
0/1000