Non-tearable cloth tape uses PET polyester fabric as the base material, coated with high-performance adhesive. It features high tack, abrasion resistance and high-temperature resistance, and meets low VOC requirements.
Download Product Manual:
PET Cloth Tape (Non-tearable)-B1300/B1600 is a PET polyester cloth tape with a synthetic-rubber adhesive for wire harness wrapping where abrasion, vibration, and temperature exposure must be considered together. The non-tearable construction is intended for applications that need a durable wrap. It is available in two models, B1300 and B1600, so engineers and harness assemblers can select a temperature range that aligns with the actual installation environment.
For automotive and electrical harness work, the value of a cloth tape is not only its initial tack. The wrap also needs to stay in place around bends, resist surface wear, and help manage contact noise as a harness moves against adjacent parts. PET Cloth Tape (Non-tearable)-B1300/B1600 combines a PET polyester cloth substrate with high-performance adhesive to provide strong initial and holding tack. The supplied technical data lists 4.5 N/cm adhesion to steel for both models, along with D-class abrasion resistance of 1000–4999 cycles and A-class noise damping of no more than 2 dB(A).
The main selection difference between the two versions is the upper temperature limit. Both models are black, 0.25 mm thick, use PET polyester cloth and synthetic-rubber adhesive, and have the same listed adhesion, abrasion class, flame-retardancy class, noise-damping class, and environmental-compliance references. The temperature requirement should therefore be checked first, followed by the mechanical conditions of the harness route.
| Property | B1300 | B1600 |
|---|---|---|
| Color | Black | Black |
| Thickness | 0.25 mm | 0.25 mm |
| Substrate | PET polyester cloth | PET polyester cloth |
| Adhesive | Synthetic rubber | Synthetic rubber |
| Tensile strength | 230 N/cm | 220 N/cm |
| Elongation at break | 45% | 30% |
| Adhesion to steel | 4.5 N/cm | 4.5 N/cm |
| Temperature range | −40 to 125°C | −40 to 150°C |
| Noise damping | A-class, ≤2 dB(A) | A-class, ≤2 dB(A) |
| Abrasion resistance | D-class, 1000–4999 cycles | D-class, 1000–4999 cycles |
| Flame retardancy | B-class self-extinguishing | B-class self-extinguishing |
| Tearability | Non-tearable | Non-tearable |
| Environmental compliance | RoHS 2.0, REACH | RoHS 2.0, REACH |
Use B1300 where the expected service temperature remains within −40 to 125°C. Select B1600 when the harness is routed in a higher-heat area and the stated range up to 150°C is required. This is a practical model comparison rather than a claim that one version is universally better: the correct choice depends on the thermal load, routing position, vibration exposure, and validation procedure of the finished assembly.
The PET cloth is coated with high-performance adhesive designed to offer both initial tack and holding tack. The listed 4.5 N/cm adhesion to steel provides a defined reference point for both B1300 and B1600. In a harness wrap, adhesive performance matters because the tape needs to conform around cable bundles and retain the wrap during assembly and service. Surface condition, wrap tension, overlap, and operating conditions should be verified.
PET Cloth Tape (Non-tearable)-B1300/B1600 is listed with D-class abrasion resistance of 1000–4999 cycles. This makes it relevant where a harness may experience friction or vibration against surrounding components. From an engineering viewpoint, abrasion protection is not determined by tape alone: routing clearance, clips, bundle geometry, and movement must be assessed together. The tape adds a durable protective layer while the assembly design controls the broader contact conditions.
Both models retain the same basic cloth-tape format while offering different upper temperature ratings. That simplifies specification when a program needs a common wrapping approach across multiple thermal zones. B1300 supports the stated −40 to 125°C range, while B1600 extends the stated upper limit to 150°C. Confirm the actual continuous and peak exposure profile during design validation rather than selecting by ambient temperature alone.
The product data identifies A-class noise damping at no more than 2 dB(A), supporting use in noise-sensitive harness locations. It also identifies B-class self-extinguishing flame retardancy. These characteristics can support a more considered harness design, especially where vibration noise and electrical-environment safety are part of the evaluation. They should be interpreted with the full assembly requirements and applicable customer test methods.
The supplied material identifies RoHS 2.0 and REACH compliance and describes the tape as low VOC. For enclosed equipment or vehicle-interior applications, documentation requirements can vary by project. Buyers should review the available compliance documentation and confirm that it fits their own market, material-declaration, and approval process.
PET Cloth Tape (Non-tearable)-B1300/B1600 is designed for wire harness protection applications that require heat and abrasion resistance. One primary example is an engine-compartment harness, where routing can involve elevated temperature, vibration, and repeated contact risk. B1300 or B1600 can be chosen according to the stated temperature range needed at the specific harness location.
A second application is general high-temperature and wear-resistant harness protection in electrical equipment or vehicles. The cloth substrate, adhesive hold, and non-tearable construction provide a wrapping option for bundles that need more durable coverage than a hand-tear tape. A third application is a noise-sensitive or low-VOC environment where the listed noise-damping characteristic and low-VOC positioning are relevant to the project’s material-selection review.
This product offers a focused combination of PET polyester cloth, synthetic-rubber adhesive, non-tearable construction, D-class abrasion resistance, A-class noise damping, B-class self-extinguishing flame retardancy, and two specified temperature ranges. The B1300/B1600 choice gives buyers a straightforward way to align thermal capability with a harness location while preserving a consistent wrapping material. For projects that need durable wire-harness protection in heat- and friction-exposed areas, PET Cloth Tape (Non-tearable)-B1300/B1600 provides documented technical reference points for a disciplined selection process.
Non-tearable cloth tape uses PET polyester fabric as the base material, coated with high-performance adhesive. It features high tack, abrasion resistance and high-temperature resistance, and meets low VOC requirements.
Download Product Manual: