Welcome to our store!

pet--tinned-copper-braided-sleeving-cr-bs-5001, pet--tinned-copper-braided-sleeving-cr-bs-5001, /pet-tinned-copper-braided-sleeving
pet--tinned-copper-braided-sleeving-cr-bs-5001, pet--tinned-copper-braided-sleeving-cr-bs-5001, /pet-tinned-copper-braided-sleeving
Inquiry
pet--tinned-copper-braided-sleeving-cr-bs-5001, pet--tinned-copper-braided-sleeving-cr-bs-5001, /pet-tinned-copper-braided-sleeving
pet--tinned-copper-braided-sleeving-cr-bs-5001, pet--tinned-copper-braided-sleeving-cr-bs-5001, 
Inquiry

PET & Tinned Copper Braided Sleeving-CR-BS-5001

CR-BS-5001 is made of tin-plated copper wire + orange PET monofilament blended together, which has good shielding properties and wear resistance.

 

 

PET & Tinned Copper Braided Sleeving-CR-BS-5001Download Product Manual:

PET & Tinned Copper Braided Sleeving-CR-BS-5001PET & Tinned Copper Braided Sleeving-CR-BS-5001PET & Tinned Copper Braided Sleeving-CR-BS-5001

Request a Quote
  • Overview

Overview

PET & Tinned Copper Braided Sleeving-CR-BS-5001

PET & Tinned Copper Braided Sleeving-CR-BS-5001 is an expandable hybrid braid for electrical harness protection where electromagnetic interference control, abrasion resistance, and clear circuit identification need to work together. The construction combines tinned copper wire with orange PET monofilament in one braided sleeve. For new energy vehicle harness programs, PET & Tinned Copper Braided Sleeving-CR-BS-5001 provides a documented starting point for evaluating shielded cable routing rather than treating a protective covering as a cosmetic accessory.

The supplied product information identifies shielding effectiveness above 60 dB from 30 MHz to 3 GHz when measured according to GB/T 30142, FMVSS 302 flammability compliance, and a stated working temperature range of -50°C to 150°C. PET & Tinned Copper Braided Sleeving-CR-BS-5001 is therefore relevant where a harness design must balance electrical shielding requirements with mechanical installation requirements. Final suitability should always be confirmed against the cable geometry, connector design, assembly method, and validation plan for the specific vehicle platform.

For release control, retain the approved part number, selected size, inspection record, and applicable test documentation with the harness build file. This makes later service review clearer and keeps engineering, purchasing, and production teams aligned during prototype and series-production change reviews.

Core Performance and Materials

Parameter Supplied product information
Shielding effectiveness Above 60 dB, 30 MHz to 3 GHz, GB/T 30142
Flammability FMVSS 302 pass
Working temperature range -50°C to 150°C
Conductive component Tinned copper wire
Polymer component Orange PET monofilament

The tinned copper portion of this braided sleeving is the conductive element of the co-braid, while the orange PET monofilament contributes to the visible braided construction. In an automotive harness review, it is useful to separate confirmed product values from project-level assumptions. The listed shielding value and temperature range are product facts; required coverage, grounding approach, cable bend radius, and system EMC limits must be defined by the vehicle or equipment design team.

Shielding should not be judged by nominal diameter alone. Braided construction, coverage, conductive material, termination, and installation all affect the result in an assembled harness. this braided sleeving gives engineers a product with a stated test reference, but the completed harness should still be assessed using the applicable program method. This practical distinction helps procurement and engineering teams avoid selecting a sleeve only by appearance or a broad material label.

Functional Features

1. Documented EMI shielding reference

this braided sleeving is described with shielding effectiveness above 60 dB over 30 MHz to 3 GHz under GB/T 30142. This gives a clear technical reference for initial comparison and supplier documentation. For battery cables, communication-adjacent routing, or electronics-rich vehicle areas, the product can be reviewed as part of a complete EMC strategy that also considers connector interfaces and grounding design.

2. Expandable braided installation

The braid expands radially when compressed lengthwise, allowing this braided sleeving to be placed over compatible harness sections, connectors, or branch areas without relying on a rigid tube format. This is especially helpful where installation access is restricted. Before release, confirm the selected size against the bundle outside diameter and the largest feature that must pass through the sleeve during assembly.

3. Thermal and flammability data for review

The stated -50°C to 150°C range and FMVSS 302 result give engineering teams defined items to include in a qualification checklist. These values do not eliminate the need for application-specific validation. In high-temperature routes, examine the complete system, including the cable insulation, clips, adjacent components, vibration exposure, and the actual dwell temperature.

4. Orange visual identification

The orange PET element provides visible differentiation that can support high-voltage harness identification practices. It can help assemblers and service personnel distinguish a protected route during inspection. Color is a useful visual aid, but it should complement—not replace—the project’s approved marking, labeling, and safety procedures.

Applications and Selection Guidance

NEV battery cable harnesses

this braided sleeving is positioned for battery cable shielding in new energy vehicle architectures. In this application, review the cable bundle diameter, connector profile, required shielding continuity, routing clearance, and specified electrical validation. Select the applicable sleeve range rather than relying only on the reference width, since the expandable construction is intended to fit a stated cable-bundle range.

Dashboard and control harnesses

For dashboard harnesses carrying communication or sensor circuits near electrical equipment, this braided sleeving can be considered where a conductive braid and visible harness management are desired. Confirm the precise interference source, frequency range, termination scheme, and assembly sequence with the responsible harness engineer. A braid cannot compensate for an unsuitable routing layout or incomplete shield termination.

Engine-compartment routing

For engine-compartment or power-electronics-adjacent harness sections, this braided sleeving can be assessed against the stated temperature range and the actual local environment. Verify abrasion points, clamp locations, fluid exposure, vibration, and service access. The relevant question is not whether the sleeve has the largest nominal diameter, but whether the selected size maintains appropriate coverage and installation flexibility for the actual bundle.

Available Sizes

Reference width Applicable range Reel length
8 ± 3 mm 5–10 mm 150 m
10 ± 3 mm 7–12 mm 150 m
12 ± 3 mm 8–16 mm 150 m
15 ± 3 mm 10–20 mm 50 m
18 ± 4 mm 15–25 mm 50 m
20 ± 4 mm 18–30 mm 50 m
22 ± 4 mm 22–34 mm 50 m
25 ± 4 mm 24–38 mm 50 m
30 ± 4 mm 26–45 mm 30 m
38 ± 5 mm 30–58 mm 30 m
45 ± 6 mm 40–68 mm 30 m
50 ± 8 mm 45–75 mm 30 m

To select this braided sleeving, measure the finished bundle outside diameter and compare it with the applicable range, then check connector passage and routing clearance. For a flexible split conduit or a high temperature silicone sleeve requirement, evaluate those product categories separately: they are not equivalent substitutes for this conductive PET and tinned-copper braided construction. Request relevant product documents and test information during supplier qualification so the selected part can be reviewed against your internal technical requirements for project approval.

PET & Tinned Copper Braided Sleeving-CR-BS-5001

CR-BS-5001 is made of tin-plated copper wire + orange PET monofilament blended together, which has good shielding properties and wear resistance.

 

 

PET & Tinned Copper Braided Sleeving-CR-BS-5001Download Product Manual:

PET & Tinned Copper Braided Sleeving-CR-BS-5001PET & Tinned Copper Braided Sleeving-CR-BS-5001PET & Tinned Copper Braided Sleeving-CR-BS-5001

Request a Quote

Featured Products

pet  tinned copper braided sleeving cr bs 5001-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Mobile
Name
Company Name
Position
Message
0/1000