Welcome to our store!

kevlar-braided-sleeving-cr-bs-3002, kevlar-braided-sleeving-cr-bs-3002, /kevlar-braided-sleeving
kevlar-braided-sleeving-cr-bs-3002, kevlar-braided-sleeving-cr-bs-3002, /kevlar-braided-sleeving
Inquiry
kevlar-braided-sleeving-cr-bs-3002, kevlar-braided-sleeving-cr-bs-3002, /kevlar-braided-sleeving
kevlar-braided-sleeving-cr-bs-3002, kevlar-braided-sleeving-cr-bs-3002, 
Inquiry

Kevlar Braided Sleeving-CR-BS-3002

CR-BS-3002 is made of 1000D Kevlar fiber precision woven, with super tensile strength and extreme temperature adaptability. The material has a high melting point, maintains structural stability at high temperatures, and has excellent cut resistance, chemical corrosion resistance, and non-flammable properties.

 

 

Kevlar Braided Sleeving-CR-BS-3002Download Product Manual:

Kevlar Braided Sleeving-CR-BS-3002Kevlar Braided Sleeving-CR-BS-3002Kevlar Braided Sleeving-CR-BS-3002

Request a Quote
  • Overview

Overview

Kevlar Braided Sleeving-CR-BS-3002 for demanding cable and hose protection

Kevlar Braided Sleeving-CR-BS-3002 is a precision-woven protective sleeve made from 1000D Kevlar aramid fiber. It is intended for cable and hose bundles that encounter sharp edges, vibration, temperature changes, or chemical exposure. The documented working temperature range is -150°C to +250°C. That range, together with the material’s stated cut resistance, chemical resistance, and non-flammable construction, makes Kevlar Braided Sleeving-CR-BS-3002 a focused option for applications where ordinary nylon, polyester, or polypropylene sleeves may not provide the required margin.

For engineers evaluating harness protection, the first question is usually not whether a sleeve looks robust, but whether its material and weave suit the real operating conditions. Kevlar Braided Sleeving-CR-BS-3002 uses a tight braided construction to cover the protected bundle while remaining flexible enough for routed assemblies. It is a sleeve for mechanical protection; it should be selected after confirming the bundle outside diameter, routing geometry, exposure conditions, and the application-specific validation requirements.

Core material and performance characteristics

Kevlar Braided Sleeving-CR-BS-3002 is made from 1000-denier Kevlar fiber. The aramid construction supports a high-strength, lightweight protective layer without the bulk associated with some heavier protective approaches. In a cable route with repeated contact points, the close braid helps distribute contact across the sleeve rather than leaving a cable jacket directly exposed to an edge or adjacent component.

  • Wide temperature capability: the stated operating range is -150°C to +250°C.
  • Mechanical protection: the Kevlar braid is described as cut resistant and abrasion resistant for demanding routes.
  • Chemical stability: the existing product material identifies resistance to many organic solvents, fuels, and industrial chemicals.
  • Non-flammable construction: the supplied material identifies this as a product characteristic for safety-sensitive protection applications.
  • Flexible braided format: the sleeve can conform to cable or hose bundles and is supplied in standard sizes.

A common assumption is that a larger sleeve automatically gives stronger protection. That is not a reliable selection method. With Kevlar Braided Sleeving-CR-BS-3002, protection depends on the aramid fiber and weave as well as the installed fit. Select a size that covers the actual bundle without forcing the braid open excessively or creating unnecessary movement. If a project includes low-temperature installation or service, confirm the relevant bending and application tests before release; a stated temperature range is an important starting point, not a substitute for project-specific qualification.

Size and ordering reference

Kevlar Braided Sleeving-CR-BS-3002 is available in six standard reference widths. The applicable range is the practical guide for matching the sleeve to the outside diameter of the protected cable or hose bundle. Fixed lengths can be cut for a project, and custom sizes may be requested when the standard ranges do not suit the design.

Part No. Reference Width Applicable Range Reel Length Art. No.
CR-BS-3002000530 5 ± 2 mm 3–7 mm 200 m KFL-005
CR-BS-3002001030 10 ± 2 mm 7–15 mm 100 m KFL-010
CR-BS-3002001330 13 ± 2 mm 10–18 mm 100 m KFL-013
CR-BS-3002001630 16 ± 2 mm 14–22 mm 100 m KFL-016
CR-BS-3002001930 19 ± 3 mm 16–25 mm 100 m KFL-019
CR-BS-3002002530 25 ± 3 mm 18–30 mm 100 m KFL-025

Measure the completed bundle rather than an individual conductor. Allow for connectors, branch points, retaining features, and any expected movement in the route. Kevlar Braided Sleeving-CR-BS-3002 can then be compared against the applicable-range column as a practical first selection step.

Where this Kevlar sleeve fits

Aerospace and high-temperature wire routes

Kevlar Braided Sleeving-CR-BS-3002 can be considered for wire harnesses in routes where temperature variation, vibration, and contact damage are significant design concerns. Its stated temperature range and lightweight braided form are relevant when routing around complex structures. The final material selection should still follow the applicable aerospace program requirements and verification plan.

Vehicle, defense, and industrial equipment

For automotive harness routing, military equipment, robotic assemblies, and industrial machinery, Kevlar Braided Sleeving-CR-BS-3002 provides an aramid-based protective option for locations exposed to chafing, sharp-edge contact, or chemicals. It is particularly appropriate to evaluate where a conventional nylon expandable braided sleeving option does not offer the same material profile. Do not treat it as an electrical insulation or sealing solution unless those properties have been separately specified and verified.

Cold-environment and dynamic installations

In cold-region, cold-chain, or cyclic-temperature equipment, Kevlar Braided Sleeving-CR-BS-3002 offers a stated low-temperature boundary of -150°C. This matters because some common sleeving materials can become less flexible in cold conditions. Confirm installation method, bend radius, end finishing, and test criteria for the actual assembly before relying on the sleeve in a critical application.

Selection guidance and comparison context

Kevlar Braided Sleeving-CR-BS-3002 is not interchangeable with every cable-management product. Spiral wrap sleeving can be useful where frequent breakout access or adjustable routing is the main need. A cable wrap organizer may suit low-demand organization tasks. A white braided cable sleeve may be chosen for appearance or identification needs. These descriptions do not establish equivalent temperature, cut, chemical, or flammability performance; compare the relevant product data before substitution.

Likewise, Kevlar Braided Sleeving-CR-BS-3002 should not be selected solely because a project has a high temperature. The route may also require abrasion protection, flexibility, bundle coverage, compatibility with fittings, or a defined documentation package. Start with the actual environment, then compare the cable or hose diameter to the standard range, and finally validate the material against the application’s test and compliance requirements. This approach is generally more useful than choosing by external size alone.

Product advantages and project support

The principal advantage of Kevlar Braided Sleeving-CR-BS-3002 is the combination described in the existing product material: 1000D Kevlar construction, a -150°C to +250°C working range, resistance to cutting and abrasion, chemical stability, and a non-flammable construction. The precision braid supports consistent coverage across the standard sizes while the flexible format helps with complex cable and hose routing.

For a technically sound inquiry, provide the bundle outside diameter, route conditions, expected temperature range, likely chemical exposure, required length, and any customer or project qualification criteria. That information helps determine whether Kevlar Braided Sleeving-CR-BS-3002 is the appropriate size and material choice, or whether another protective format should be reviewed. Custom length and diameter discussions can be based on the actual project requirement.

Kevlar Braided Sleeving-CR-BS-3002

CR-BS-3002 is made of 1000D Kevlar fiber precision woven, with super tensile strength and extreme temperature adaptability. The material has a high melting point, maintains structural stability at high temperatures, and has excellent cut resistance, chemical corrosion resistance, and non-flammable properties.

 

 

Kevlar Braided Sleeving-CR-BS-3002Download Product Manual:

Kevlar Braided Sleeving-CR-BS-3002Kevlar Braided Sleeving-CR-BS-3002Kevlar Braided Sleeving-CR-BS-3002

Request a Quote

Featured Products

kevlar braided sleeving cr bs 3002-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Mobile
Name
Company Name
Position
Message
0/1000