Welcome to our store!

halogen-free-environment-friendly-heat-shrinkable-sleeve, halogen-free-environment-friendly-heat-shrinkable-sleeve, /halogen-free-environment-friendly-heat-shrinkable-sleeve288
halogen-free-environment-friendly-heat-shrinkable-sleeve, halogen-free-environment-friendly-heat-shrinkable-sleeve, /halogen-free-environment-friendly-heat-shrinkable-sleeve288
Inquiry
halogen-free-environment-friendly-heat-shrinkable-sleeve, halogen-free-environment-friendly-heat-shrinkable-sleeve, /halogen-free-environment-friendly-heat-shrinkable-sleeve288
halogen-free-environment-friendly-heat-shrinkable-sleeve, halogen-free-environment-friendly-heat-shrinkable-sleeve, 
Inquiry

Halogen-Free Environment Friendly Heat Shrinkable Sleeve

Halogen-free environment-friendly heat shrinkable sleeve is made of crosslinking modified polyolefin resin. It is halogen-free, environment-friendly, low-smoke and flame-retardant, with excellent electrical insulation and high temperature & voltage resistance. Widely used in electronics, automotive, metro, construction, public facilities and more.

 

 

Halogen-Free Environment Friendly Heat Shrinkable SleeveDownload Product Manual:

Halogen-Free Environment Friendly Heat Shrinkable SleeveHalogen-Free Environment Friendly Heat Shrinkable SleeveHalogen-Free Environment Friendly Heat Shrinkable Sleeve

Request a Quote
  • Overview

Overview

Halogen-Free Heat Shrink Sleeve

Halogen-Free Environment Friendly Heat Shrinkable Sleeve uses crosslinked modified polyolefin resin for electrical insulation and cable protection. The supplied material describes a halogen-free, environment-friendly sleeve with low-smoke and flame-retardant characteristics. It is intended for projects that need a flexible insulating layer around wires, components, or bundled conductors.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve provides a clear technical starting point for engineers and buyers comparing sleeving options. Rather than treating a sleeve as a generic accessory, a project team can check recovered diameter, wall type, temperature exposure, voltage requirement, and the relevant finished-assembly conditions before release.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve has supplied references to RoHS and SONY compliance, continuous third-party control of environment-related substances, and ULRSCS certification. Those references can support a documentation review, but the buyer should confirm the certificate scope and the exact requirements that apply to the finished product.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve is described as low smoke and flame retardant. The source material cites UL224 VW-1 and Japanese JQAF-mark flame-retardance grades. These statements are useful selection inputs; they should not replace validation of the complete cable, connector, and installation arrangement.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve has a supplied UL224 125°C certification reference and 300V and 600V voltage ratings. For a new design, review the actual temperature profile, conductor loading, clearance, and assembly method. This approach keeps material selection tied to the project instead of relying on broad claims.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve uses a soft and elastic construction that can conform closely to cables during installation. This feature can assist neat routing around internal wires and components. Confirm the shrink process and selected size with a representative sample, especially where the bundle has irregular geometry.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve can be reviewed for electronics and internal appliance wiring, both of which are listed in the supplied application material. In these uses, the sleeve can be considered as part of an insulation plan that also accounts for strain relief, connector access, and space around nearby components.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve is also presented for automotive wiring harnesses and motor leads where high-temperature insulation is required. The application listing is a direction for engineering evaluation, not a statement that every vehicle program has the same requirements. Confirm program-specific specifications before approval.

is listed for metro vehicle cable protection, building electrical wiring, and public-facility cables. Each environment can involve different fire, smoke, electrical, mechanical, and local-code requirements. A careful review should align the chosen sleeve with those conditions and the buyer’s validation process.

has supplied mechanical information including longitudinal change of no more than ±5%, tensile strength of at least 10.4 MPa, and elongation at break of at least 200%. These figures help create a focused comparison sheet when several wall constructions or diameters are under consideration.

has supplied aging information: hot-air aging at 158°C ±1.0°C for 168 hours, followed by minimum tensile strength of 7.3 MPa and minimum elongation of 100%. When using these data, compare the stated test basis with the actual service exposure rather than extrapolating beyond it.

has a supplied volume resistivity of at least 10¹⁴ Ω·cm. The supplied pressure result is 2500V for 60 seconds with no breakdown. The source also lists VW-1 flammability, no cracks in thermal shock, and concentricity of at least 70, which together form a useful material-review reference.

offers ultra-thin wall sizes from Φ0.6 through Φ35 and general product sizes from Φ0.6 through Φ100 in the supplied specification tables. The tables list before-and-after inner diameter and wall thickness. Select by the recovered requirement and actual bundle dimensions, not nominal size alone.

can be cut to a fixed length as required according to the supplied product information. If a project needs precut pieces, identify the requested length, tolerance, size, wall type, and packaging method during the technical discussion. Confirm availability and acceptance details before purchase.

keeps the product discussion practical. Start with the cable or component geometry, identify the operating temperature and voltage requirement, then check the recovered diameter and wall construction. Finally, verify documentation needs and test the selected option in the intended assembly process.

supports a compliance-oriented decision process without overstating its scope. The supplied content includes an UL1446 insulation-system compatibility statement for the DASH2B-5 system of PD GEORGE CO/RIPLEY PESIN. Buyers should verify that the specific system and end-use configuration match their requirement.

can offer a useful balance of halogen-free material characteristics, low-smoke behavior, electrical insulation, and flexible installation. The value of each characteristic depends on the actual project. A qualification plan should consider the full assembly, not merely a single material data point.

is best chosen through a traceable review. Record the selected size, expected recovered diameter, installation method, service temperature, voltage class, and required documents. This record helps manufacturing, quality, and purchasing teams communicate the same basis for selection and future changes.

provides information that can be organized into a specification-led product page: material definition, verified performance indicators, applications, size availability, and selection guidance. This structure gives buyers useful facts while leaving unsupported application assumptions out of the product description.

can be evaluated as part of an overall cable-protection design. For high-priority projects, test a representative assembly and review the applicable standard, customer requirement, and local regulation. Contact the supplier for specific size, fixed-length, or document questions before finalizing the order.

Key Features

  • Halogen-free and environment-friendly material stated in the supplied product data.
  • Low-smoke and flame-retardant characteristics, with cited UL224 VW-1 and JQAF-mark references.
  • Soft and elastic construction for close conformity to cable routing.
  • Supplied temperature reference of 125°C and voltage ratings of 300V and 600V.
  • Available ultra-thin wall and general wall constructions across supplied size ranges.

Performance Indicators

Item Supplied performance parameter
Temperature rating 125°C
Longitudinal change ≤±5%
Tensile strength ≥10.4 MPa
Elongation at break ≥200%
Hot-air aging 158°C ±1.0°C, 168h
Post-aging tensile strength ≥7.3 MPa
Post-aging elongation ≥100%
Voltage rating 300V, 600V
Volume resistivity ≥10¹⁴ Ω·cm
Pressure test 2500V, 60s, no breakdown
Flammability VW-1
Thermal shock No cracks
Concentricity ≥70

Applications and Next Steps

Listed applications include electronics, electrical appliances, automotive harnesses, motor leads, metro vehicle cables, construction wiring, and public facilities. Confirm the final application requirement, requested sleeve size, shrink process, and relevant documents with the supplier.

Halogen-Free Environment Friendly Heat Shrinkable Sleeve

Halogen-free environment-friendly heat shrinkable sleeve is made of crosslinking modified polyolefin resin. It is halogen-free, environment-friendly, low-smoke and flame-retardant, with excellent electrical insulation and high temperature & voltage resistance. Widely used in electronics, automotive, metro, construction, public facilities and more.

 

 

Halogen-Free Environment Friendly Heat Shrinkable SleeveDownload Product Manual:

Halogen-Free Environment Friendly Heat Shrinkable SleeveHalogen-Free Environment Friendly Heat Shrinkable SleeveHalogen-Free Environment Friendly Heat Shrinkable Sleeve

Request a Quote

Featured Products

halogen free environment friendly heat shrinkable sleeve-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Mobile
Name
Company Name
Position
Message
0/1000