Sleeve tape uses high-strength, wear-resistant polyester fabric as the base material, coated with a high-performance synthetic rubber adhesive layer, specially designed for harsh environments such as engine compartments. It features good flexibility, high adhesion, exceptional abrasion resistance, chemical resistance, high temperature resistance and flame retardancy.
Download Product Manual:
Flexible Tape-X-1300A is a black polyester cloth sleeve tape designed for bundling and protecting automotive electrical wire harnesses. It combines a PET polyester cloth substrate with a synthetic rubber adhesive, so a wrapped harness can remain flexible while receiving secure bundling and surface protection. Flexible Tape-X-1300A is intended for locations where routing, vibration, abrasion, and noise control need to be considered together rather than as separate requirements.
For harness engineers and assembly teams, Flexible Tape-X-1300A offers a practical way to organize a wire bundle without making the finished harness unnecessarily stiff. The soft cloth base follows bends and changes in routing direction. At the same time, the adhesive is specified to provide reliable bundling. This balance matters when a harness passes through a confined area or near harder surrounding parts. Flexibility alone does not define a suitable wrap; the material, adhesive behavior, abrasion requirement, temperature exposure, and installation method should all be reviewed for the actual location.
Flexible Tape-X-1300A is supplied as a cloth-backed wire-harness tape. Its stated substrate is PET polyester cloth and its adhesive is synthetic rubber. The product has a total thickness of 0.50 ± 0.06 mm. The listed tensile strength is at least 160 N/cm, elongation at break is at least 10%, and adhesion to steel is at least 1.5 N/cm. These values provide a useful technical reference when comparing the tape with the routing needs and protection targets of a harness design.
The published temperature range for Flexible Tape-X-1300A is 40 to 125°C. The original product information identifies demanding locations such as engine compartments as an intended use context. Temperature rating should still be checked against the complete assembly environment, including local heat sources, exposure time, vibration, chemical media, and any customer-specific validation requirement. A temperature figure is one important selection input, not a substitute for application-level testing.
It is tempting to judge a harness tape only by how soft it feels in the hand. In practice, a flexible feel does not automatically prove long-term suitability in every bend zone. Flexible Tape-X-1300A should be selected against the actual route, contact points, temperature exposure, and required protective function. Where a harness repeatedly moves against a hard component, the abrasion classification and wrap coverage deserve particular attention.
| Property | Specified value |
|---|---|
| Product No. | X-1300A |
| Color | Black |
| Substrate | PET polyester cloth |
| Adhesive | Synthetic rubber |
| Total thickness | 0.50 ± 0.06 mm |
| Tensile strength | ≥160 N/cm |
| Elongation at break | ≥10% |
| Adhesion to steel | ≥1.5 N/cm |
| Temperature range | 40–125°C |
| Noise damping | A-class, ≤2 dB(A) |
| Abrasion resistance | E-class, 5000–14999 cycles |
| Flame retardancy | B-class self-extinguishing |
| Environmental compliance | RoHS 2.0, REACH |
The values above are typical reference values from the product material. For a project with a mandatory test method, acceptance limit, or customer specification, confirm the applicable test conditions before release. Flexible Tape-X-1300A is not presented here as a universal solution for every cable-protection task; it is a cloth tape whose documented properties should be matched to the job.
Flexible Tape-X-1300A is suitable for bundling automotive electrical wire harnesses, particularly where the harness needs wear-resistant protection while remaining flexible for routing. A cloth-backed wrap can help form a more manageable bundle around branches and curved paths. Before production use, assess the wrap overlap, the direction of tape application, the expected movement of the bundle, and the location of clips or retaining features.
Where a harness may contact hard components, Flexible Tape-X-1300A can be considered for abrasion-focused wrapping based on its stated E-class abrasion range. Protection performance depends on the contact geometry and the amount of movement. In a tight bend, wear may concentrate in a small area rather than distribute across the full wrap. Looking at the actual bend zone is therefore more useful than relying on a general assumption that a larger or thicker-looking wrap will always protect better.
Flexible Tape-X-1300A may also be relevant when harness contact noise is a design concern. Its listed A-class noise damping value supports an abrasion-and-noise protection role while helping avoid direct contact with conductors. For a quiet routing design, consider not only the tape but also bundle movement, clip location, clearance to adjacent parts, and the materials of surrounding surfaces.
Select Flexible Tape-X-1300A against the route, contact points, temperature exposure, required test method, and wrap installation conditions. For elevated-temperature or chemical-media applications, confirm the complete system requirements before production release.
The differentiating value of Flexible Tape-X-1300A is the combination of a flexible PET polyester cloth base, synthetic rubber adhesion, E-class abrasion resistance, A-class noise damping, and documented technical reference data in one harness-tape format. Instead of treating flexible routing and protective wrapping as competing priorities, it is designed to address both. Its black finish, 0.50 ± 0.06 mm total thickness, and stated RoHS 2.0 and REACH compliance information add useful reference points for specification review.
Flexible Tape-X-1300A is best evaluated as part of a complete harness design. Verify the application conditions, confirm the required test standard, and use sample validation where the route or environment is demanding. The product information above is intended to support an informed comparison while preserving the original technical facts.
Sleeve tape uses high-strength, wear-resistant polyester fabric as the base material, coated with a high-performance synthetic rubber adhesive layer, specially designed for harsh environments such as engine compartments. It features good flexibility, high adhesion, exceptional abrasion resistance, chemical resistance, high temperature resistance and flame retardancy.
Download Product Manual: