RS1461 features a double-layer composite structure. The outer layer is made of aluminum foil, which blocks heat radiation conduction. The inner layer is woven from high-temperature-resistant glass fiber, which maintains flexibility while enhancing thermal insulation efficiency.
Download Product Manual:
The Aluminum Foil Fiberglass Sleeving-RS1461 is a dual-layer composite heat-protection sleeve for automotive and industrial wire harness applications. RS1461 combines an outer aluminum foil layer with a high-temperature-resistant fiberglass weave inner layer. The aluminum foil reflects radiant heat away from the harness bundle, while the fiberglass layer provides mechanical strength and maintains flexibility across an operational temperature range of -40°C to +200°C.
RS1461 is widely used in automobiles to protect engine wiring harnesses, air conditioning lines, control cables, and fuel lines — anywhere where sustained heat exposure and chemical splash are simultaneous concerns.
For engineers sourcing materials for engine bay harness protection, parameter credibility is a legitimate concern. RS1461 has been subjected to a 200°C heat-ageing test sustained for 240 continuous hours with no stratification or delamination of its composite layers. This heatproof sleeving is also rated to -40°C at the cold end, making it suitable for cold-weather assembly environments and low-temperature operating conditions. Low-temperature brittleness is often the verification step that gets skipped during procurement — it is a step worth confirming before committing to a large-volume order.
RS1461 passes the horizontal combustion test per GB8410-2006 at A-0 level — the most stringent passing classification under that standard for automotive interior materials. Flame retardancy is a non-negotiable requirement in most OEM supply chains. From experience on supplier qualification reviews, flame retardant grade documentation is among the items most frequently absent in the initial submission package. RS1461 addresses this with its certified A-0 classification backed by GB8410-2006 test records.
Engine bays expose wiring to both radiant heat from exhaust components and conducted heat from the engine block. The aluminum foil outer layer of the Aluminum Foil Fiberglass Sleeving-RS1461 reflects radiant energy before it reaches the harness bundle, directly reducing the thermal load on the inner fiberglass weave and wiring insulation. For sensor cables routed near heat sources, this dual-layer protection provides a meaningful advantage over single-material heatproof sleeving that relies only on conduction resistance.
Air-conditioning refrigerant lines run near the engine and compressor, where they face elevated temperatures, vibration, and abrasion. The closed tubular form of RS1461 provides complete circumferential coverage with no seam to close. This is a practical advantage over split braided wire loom or split convoluted sleeving, both of which use an open slit design that typically requires supplementary closure tape to maintain coverage. For A/C line protection where vibration and routing bends are factors, the seam-free construction reduces the risk of gaps developing over the product service life.
RS1461 has been tested to resist gasoline and common engine-bay chemicals. Fuel lines in the engine bay pass through zones combining heat and chemical splash. For engineers familiar with using high temperature shrink tubing for end sealing and point protection, RS1461 serves the complementary role of continuous run protection along the full length of fuel and fluid lines, providing both thermal and mechanical coverage in a single installed sleeve.
Control cables and multi-conductor harness assemblies routed through high-temperature zones benefit from RS1461's combination of thermal shielding and mechanical coverage. The flexible fiberglass inner weave accommodates routing bends without kinking. Consistent all-around coverage along the harness route reduces localized temperature peaks that accelerate insulation aging.
| Test Item | Test Method | Result |
|---|---|---|
| Heat ageing test | 200°C, 240 hours | No stratification |
| Horizontal combustion test | GB8410-2006 | A-0 |
Values above are typical test values. Project-specific test reports are available on request to support supplier qualification and OEM technical review.
The Aluminum Foil Fiberglass Sleeving-RS1461 is available in nominal internal diameters from 8mm to 36mm, wall thickness 0.55±0.15mm, supplied in 50m reels.
| Part No. | Nominal I.D. (mm) | Thickness (mm) | Reel Length (m/reel) |
|---|---|---|---|
| RS14610815 | 8 | 0.55 ± 0.15 | 50 |
| RS14610915 | 9 | 0.55 ± 0.15 | 50 |
| RS14611015 | 10 | 0.55 ± 0.15 | 50 |
| RS14611115 | 11 | 0.55 ± 0.15 | 50 |
| RS14611215 | 12 | 0.55 ± 0.15 | 50 |
| RS14611315 | 13 | 0.55 ± 0.15 | 50 |
| RS14611415 | 14 | 0.55 ± 0.15 | 50 |
| RS14611515 | 15 | 0.55 ± 0.15 | 50 |
| RS14611615 | 16 | 0.55 ± 0.15 | 50 |
| RS14611715 | 17 | 0.55 ± 0.15 | 50 |
| RS14611815 | 18 | 0.55 ± 0.15 | 50 |
| RS14611915 | 19 | 0.55 ± 0.15 | 50 |
| RS14612015 | 20 | 0.55 ± 0.15 | 50 |
| RS14612215 | 22 | 0.55 ± 0.15 | 50 |
| RS14612415 | 24 | 0.55 ± 0.15 | 50 |
| RS14612515 | 25 | 0.55 ± 0.15 | 50 |
| RS14613215 | 32 | 0.55 ± 0.15 | 50 |
| RS14613615 | 36 | 0.55 ± 0.15 | 50 |
The manufacturing facility for RS1461 holds certifications under ISO 9001, IATF 16949, ISO 14001, ISO 45001, and GJB9001C. For automotive Tier 1 procurement teams, IATF 16949 is typically a hard qualification requirement. Batch consistency is a core output of IATF-certified production, and it is one of the most important supply evaluation factors for harness protection materials used across multi-year production programs.
Complete technical documentation — including product specification sheets, material data tables, and test report directions for heat ageing and flame retardancy — is available to support your internal technical review and supplier qualification package. Contact the sales team to request documentation or project-specific test reports.
RS1461 is manufactured by Dongguan Chengrun New Materials Co., Ltd., whose product range covers fiberglass sleeving, automotive corrugated conduit, heat shrink tubing, PVC sleeving, and automotive wire harness tape — supporting customers who prefer to consolidate wire harness protection sourcing with a single qualified supplier.
RS1461 features a double-layer composite structure. The outer layer is made of aluminum foil, which blocks heat radiation conduction. The inner layer is woven from high-temperature-resistant glass fiber, which maintains flexibility while enhancing thermal insulation efficiency.
Download Product Manual: